AM 110 PUMP DRIVE

Maximum Input Power 180 kW (242 hp)
1:1 ratio @ 3200 rpm

Pump Drive Application Data Sheet (165k pdf)

  • Cast iron housings
  • Case hardened and ground spur gears
  • Ball bearings
  • Case hardened shafts
  • Viton seals on input shaft
  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs
  • Maximum input torque based on theoretically unlimited gear life and a minimum L10 bearing life of 10,000 hours

TECHNICAL DATA

Ratio
:1
MAXIMUM INPUT TORQUE
N-m (lbf-ft)
MAX. OUTPUT TORQUE
PER PUMP PAD
N-m (lbf-ft)
MAXIMUM
INPUT SPEED
RPM
MAXIUM
OUTPUT SPEED
RPM
OIL QUANTITY
L (gal)
0.49 735 (542) 360 (266) 2400 4898 2.3 (0.61)
0.58 705 (520) 410 (302) 2500 4310 2.1 (0.55)
0.67 675 (498) 450 (332) 2650 3955 1.9 (0.50)
0.77 635 (468) 490 (361) 2850 3701 1.8 (0.48)
0.83 600 (442) 500 (369) 3000 3614 1.8 (0.48)
1.00 540 (398) 540 (398) 3200 3200 1.6 (0.42)
1.30 490 (361) 640 (472) 3600 2769 1.3 (0.34)
1.50 450 (332) 675 (498) 3600 2633 1.1 (0.29)

DIMENSIONS

Publications:

Description Download
Product Bulletin (Deutsch)PDF

Installation Drawings:

Model Drawing Number Number of Pads Input Output Notes Download
AM1101029011G1RO211 SAE #3/11.5" clutch50mm keyed shaftspecial configuration for 30° CW installation position PDF STEP
AM1101029011H1RO211 SAE #3/11.5" clutch50mm keyed shaftspecial configuration for 30° CW installation position PDF IGES
AM1101029011F1RO211 SAE #3/11.5" clutch50mm keyed shaftspecial configuration for 270° installation position PDF STEP
AM1101029011D1BD290 SAE #3/11.5" clutch50mm keyed shaftspecial configuration for 270° installation position PDF DWG STEP
AM1101029011C1ASAE 1-3/8" -6T shaft8-32-36 pad , DIN 5462 splineHydroLeduc XPI pumpPDF DWG STEP IGES
AM1101029011A150mm keyed shaft8-32-36 pad, DIN 5462 splineHydroLeduc XPI pumpPDF DWG STEP IGES
AM1101029011B1DIN 5482 spline shaftSAE "A" 2-4 bolt pad , SAE "A" 9T splinePDF DWG STEP IGES
AM1101029011E1Spcier 1550 flangeSAE "C" 2-4 bolt, SAE "C" 14T splinePDF DWG STEP IGES