Twin Disc - Standard CA Inline Clutch

Corporate Home > Industrial and Transmission Products > Industrial Products > Mechanical PTOs > Standard CA Inline Clutch

Standard CA Inline Clutch

CA110 & CA210

PTO Application Data Sheet (160k pdf)

Downloads

CA Series Bulletin (230k pdf)
CA110 Drawing (132k dwg)
CA210 Drawing (138k dwg)
Industrial Line Brochure (1.12 MB pdf)
Oil and Gas Industry Brochure (1.80 MB pdf)

Contact Twin Disc for Survey Society Approvals and Classifications. Specifications subject to change without prior notice in the interest of continual product improvement.

Off-the-shelf availability
Proven design tailored to the industry
Creates suitable application torque
Broader horsepower coverage up to 400 hp
Sealed for life ball type main bearing
Built-in hex nut eases adjustment verification
Limited 2-year warranty
Made in USA

SPECIFICATIONS - CA110 & CA210

Model Number	SAE HSG.	Max. Input Torque Nm (lb-ft)	Maximum Safe Speed	Weight kg (lbs)
CA110P3, CA110P4	3, 4	610 (450)	3100	44 (96)
CA210P3	3	1220 (900)	3100	51 (112)

Click here to Calculate Determine Actual Applied Load
Click here to Calculate Calculate Application Torque

TO CALCULATE APPLICATION TORQUE:

    5252 x HP/Engine RPM = Torque
    Torque x Load Factor = Application Torque
    Use load factor from chart below

LOAD CLASSIFICATIONS BASED UPON AGMA LOAD CHARACTERISTICS

		Uniform	Moderate Shock	Heavy Shock
	Up to 3 hours per day	1.00	1.25	1.50
Electric motor	3—10 hours per day	1.00	1.25	1.75
	Over 10 hours per day	1.25	1.50	2.00
Multi-cylinder internal	Up to 3 hours per day	1.00	1.25	1.75
combustion engine	3—10 hours per day	1.25	1.50	2.00
	Over 10 hours per day	1.50	1.75	2.25
Multi-cylinder internal	Up to 3 hours per day	1.50	1.75	2.25
combustion engine	3—10 hours per day	1.75	2.00	2.50
with high torque rise	Over 10 hours per day	2.00	2.25	2.75
Single cylinder internal	Up to 3 hours per day	1.25	1.50	2.00
combustion engine	3—10 hours per day	1.50	1.75	2.25
	Over 10 hours per day	1.75	2.00	2.50

All clutch engagements to be with prime mover below 1000 RPM.
High inertia loads may require use of larger clutch.
Contact Twin Disc application engineering department for assistance.

1-262-638-4000

Standard CA Inline Clutch

CA110 & CA210 PTO Application Data Sheet (160k pdf)

Downloads

SPECIFICATIONS - CA110 & CA210

CA110 & CA210

PTO Application Data Sheet (160k pdf)